Browsing from:

GE Fanuc Series 90-70 CPUs

CPUs

CPU – The heart and brains of any PLC system is the CPU. All PLCs require a CPU to function. In the Series 90-70 the CPU is modular and mounts right into the system rack. To properly configure a Series 90-70 system the engineer must survey the requirements and the intended results he expects from the PLC system he creates. Choosing the proper CPU to handle the various requirements necessitates surveying the machine documents, mechanical drawings, and specifications of the machinery being used and of the finished product expected. Here are the major considerations for the engineer in configuring a system to meet his needs and selecting the proper CPU:

  • I/O Points – Determining the number of Input and Output points the system will require is the basic first step in configuring a PLC system. This determination will ultimately decide most of the equipment options to follow. Fewer I/O Points leaves the engineer with the option of choosing CPUs with less memory and capability. A high number of I/O Points will require selections of a CPU with greater capabilities, such as more memory and speed. The accompanying chart delineates the various CPU options to meet virtually all system requirements. The number of I/O Points also dictates the number of racks the system will require, the number and type of input and output modules needed, and even the number of power supplies required.
  • I/O Modules – After the engineer has determined the number of I/O Points his system requires, he can then select the I/O Modules he will need to configure the system. Since there are a significant number of I/O Modules available, he will need to refer to the accompanying table to determine his needs. Some selection factors include:
    1. Voltage/Current – the Series 90-70 is capable of meeting all industrial voltage and current requirements. Considerations include AC/DC and 110V/120V or 240V. The answers to the voltage and current requirements also figure in selecting the power supplies to be used, as well as the I/O Modules.
    2. Isolation – Will the system components need to protected from harsh environments, such as automotive spray booths or extreme temperatures? What are the distances the system components will be separated? The accompanying table lists the various options based on these factors.
    3. Standardization – Does your company already use specific components to save on inventory, repair parts, and even training?
    4. Cost – As noted above, smaller numbers of I/O Points require less expensive systems. Also noteworthy is the capability of using higher volume modules instead of 2 or 3 lower volume ones, saving on both module and rack/power supply expenses.
  • Communication and Specialty Modules – Determining the type of communication requirements, such as Ethernet or other networks, aids in selecting the proper modules required. Requirements for interfacing with machinery, such as CNC, need to be assessed. Also, such needs as motion control, high speed inputs, servo control, and the like must be determined to properly configure the system.

Having made all of these system determinations, the engineer can now proceed to CPU selection. Series 90-70 CPUs have many options available, such as memory size, speed, performance, and even enhanced software options. They all have TOD (time of day) clocks and are password protected, and all (except CPU731) have keylock protection. All of the CPUs available (except CPU731) have floating point math capabilities, enabling decimal point calculations and the use of trigonometric, logarithmic, exponential, and radian conversion factors. The highest performance CPUs available in the Series 90-70 use the state-of-the-art 486DX4 microprocessor, with redundant operations capability. The CPM790 is programmed with software for use in Emergency Shut Down (ESD), fire and gas, and other critical control operations, Comparing the various CPUs is easy with the following table:

PART NUMBER SPEED (MHz) PROCESSOR I/O POINTS (DISCRETE I/O ANALOG CPU MEMORY USER LOGIC RAM USER FLASH MEMORY FLOATING POINT MATH SYSTEM
IC697CPU731 12 80C186 STANDARD 512 8K 32K NO NO 32 BIT
IC697CPX772 96 80486DX4 STANDARD 2048 8K 512K 256K YES 32 BIT
IC697CPX782 96 80486DX4 STANDARD 12288 8K 1MB SLOW 256K YES 32 BIT
IC697CPX928 96 80486DX4 STANDARD 12288 8K 6MB MEDIUM 256K YES 32 BIT
IC697CPX935 96 80486DX4 STANDARD 12288 8K 1MB FAST 256K YES 32 BIT
IC697CGR772 96 80486DX4 REDUNDANT HOT SWAP STANDBY 2048 8K 512K NO YES 32 BIT
IC697CGR935 96 80486DX4 REDUNDANT HOT SWAP STANDBY 12288 8K 1MB NO YES 32 BIT
IC697CPM790 64 80486DX2 REDUNDANT  HOT SWAP STANDBY 12288 8K INPUT 8K OUTPUT 1MB NO YES 32 BIT
PLC Parts

PLC Parts

Supplier of PLC Parts for:

GE Fanuc
Allen-Bradley

 
 
Engineered Media
 
Engineered Media - Google AdWords Partner | Digital Marketing Agency