Contact Details:
Comus Europe Ltd
Rice Bridge Industrial Estate
Unit 7
Thorpe le Soken
Essex
CO16 0HL
United Kingdom
Tel: +44 (0) 1255 862236
Alt. Tel: +44 (0) 1255 862014
Send Enquiry | Company Information
Professional Level Float Switches
Product News Wednesday, August 31, 2011: Comus Europe Ltd
The sensor is easy to use. By simply adjusting 2 trimmers you can
set required time and minimum vibrations. Adjust the module for
your needs by first setting the time. For sources that have a low
vibration frequency or don’t vibrate all the time, you set the time
longer. This you do by turning the trimmer to the left. For fast
vibrating devices you need to set the time shorter, to ensure that the
minimum number of vibrations can easily be set. The best way to
set the time, is to turn on the source and sensor, set the second
trimmer in the middle. Then you need to search for the turning point
of the LED. That point is your time.
The second trimmer is for adjusting the minimum number of
vibrations needed to set the output during the previously set time.
For adjusting the second trimmer, the device and the sensor still
need to be on. Normally you have found the switching point with
the time adjuster, but for very high or low vibrations you need to set
the second trimmer to the right for high vibrations and left for low
vibrations.
After you found the switching point, you need to turn the trimmer just a little bit further so the LED is
on. This is because if the vibration decreases a bit the sensor would no longer detect the vibration. But
don’t set the device to sensitive, because of risk that the device detects vibrations from other sources.
