Browsing from:

OLI Electrical Vibrators (Pty) Ltd

Product Detail Pages


EWO – High Frequency Internal Vibrators with Built-in Converter

EWO – High Frequency Internal Vibrators with Built-in ConverterEWO Electric High Frequency Internal Vibrators, which are directly connected with the mains supply at 230 V, 50/60 Hz, consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose. The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head.

VHN – Electric High Frequency Internal Vibrators

VHN – Electric High Frequency Internal VibratorsVHN Electric High Frequency Internal Vibrators (standard range) consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose. The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head. Vibrators are equipped with a key pad (IP 66 protection) in polyamide, complete with switch protected by a reinforced gasket resistant to continuous use and wear.

CM – Frequency and Voltage Converters

CM – Frequency and Voltage ConvertersFrequency and Voltage Converters consist of an electric motor coupled to a permanent magnet generator that reduces the single-phase (230 V, 1 ph) or three-phase (400 V, 3 ph) input voltage into one lower than 50 V increasing the frequency to 200 Hz, necessary for correct operation of electric internal vibrators, thus ensuring operator safety as occurs with low voltage equipment.

VHP – Electric High Frequency Internal Vibrators

VHP – Electric High Frequency Internal VibratorsVHP Electric High Frequency Internal Vibrators (professional range) consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose. The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head. Vibrators are equipped with a key pad (IP 66 protection) in polyamide, complete with switch protected by a reinforced gasket resistant to continuous use and wear.

MVE Standard Range

MVE Standard RangeMVE External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends.

MVE-Exe Increased Safety Range

MVE-Exe Increased Safety RangeIncreased Safety MVE-E External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends. Special design features materials used prevent sparking inside the motor.

MVE-Exd Explosion-Proof

MVE-Exd Explosion-ProofExplosion-Proof MVE-D External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends. Special design features and tight tolerances avoid that any possible explosion inside the motor will affect the external environment, making the explosion-proof MVE-D suitable for applications in the oil & gas industry where such a feature is mandatory.

MVE-F Flanged Vibrators

MVE-F Flanged Vibrators“S” series “Flanged Motovibrators” consists of an electric motor housed in a FEMA-designed cast casing, with eccentric weights fitted on both shaft ends. “S” series “Sieves” have been specifically designed and optimized for circular sieve applications, with the target to improve the overall performance of the application. “S” series “Industrial” have been developed for all other applications, with the aim of reducing maintenance costs and consequently machine shutdown times.

MVE-Food Stainless Steel

MVE-Food Stainless SteelMVE External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends.

MVE-DC Direct current

MVE-DC Direct currentMVE External Electric Motovibrators DC consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends that works at 12 or 24 volts.

S – Rotary Pneumatic Vibrators – Ball

S – Rotary Pneumatic Vibrators – BallWith S-series Ball Vibrators vibration is generated by the movement of a ball inside an eccentric guide. S-series vibrators generate low amplitude high frequency vibration. They are particularly efficient with fine powders granular materials such as sand or seeds. They are also suitable compacting applications in consolidation.

PG – Air Blasts

PG – Air BlastsRat-holing is a phenomenon that frequently occurs inside bins or silos with certain materials. Due to the physical and chemical properties of the product, the central material column drops instantaneously as soon as the silo outlet valve is opened, while the surrounding material remains immobile. Especially with light materials a PG-type GUNJET Air Cannon is often the ideal solution for such inconvenient situations.

PS – Single Impact Pneumatic Hammers

PS – Single Impact Pneumatic HammersPS – Single Impact Pneumatic Hammers

MVE-FD Flanged Drive

MVE-FD Flanged DriveFlanged Screen Devices FD consists of an electric motor housed in a FEMA-designed cast casing, with eccentric weights fitted on both shaft ends and a flange arranged to be connected to the vibrating machine lateral sides with a shaft designed for interconnection between two FD. Flanged Screen Devices FD have been specifically designed and optimized to be applied onto horizontal or inclined vibrating equipment on mobile and stationary plants.

MVE-SV Long Screen Vibrators

MVE-SV Long Screen VibratorsSV electric vibrator “long” has been designed for quarry & mining, oil & gas sectors. No crossbeam, direct vibration, adjustable Centrifugal Force.

I100 – Aeration Pads

I100 – Aeration PadsI100 – Aeration Pads

VBT – Tank Truck Aerators

VBT – Tank Truck AeratorsThe new range of OLI Vibro aerator is the outcome of 2 years of research and development in collaboration with WAM Group testing department. Unique and Patented design UNI-Directional air flow ,Tramontana® technology can be found in the VBS that you can identify as VBT Quick Flow ( “T” means for Truck app).

MVO850 – Hydraulic Vibrator

MVO850 – Hydraulic VibratorMVO850 – Hydraulic Vibrator

P – Linear Pneumatic Vibrators – Continuous impact

P – Linear Pneumatic Vibrators – Continuous impactP-Series Continuous Impact Vibrators produce a shockwave generated by the continuous impact of their internal piston on the metallic base mount welded on the or wall. They are particularly efficient with bulk materials that tend to stick to the wall. Typically P-series vibrators are used wet or electrostatics powders such as clay or, but also sludge or manure.

VBS – Bin Aerators

VBS – Bin AeratorsThe new range of OLI Vibro aerator is the outcome of 2 years of research and development in collaboration with WAM Group testing department. In the market you can fine different model of Vibro aerators , and it is very difficult ,even for expert, to identified the differences , if any.

OR Rotary Pneumatic Vibrators

OR Rotary Pneumatic VibratorsOR Rotary Pneumatic Vibrators

OT – Rotary Pneumatic Vibrators – Turbine

OT – Rotary Pneumatic Vibrators – TurbineOT – Rotary Pneumatic Vibrators – Turbine

OWC – Rubber Oscillating Suspension

OWC – Rubber Oscillating SuspensionOWC oscillating suspension assure a high shock-absorbing level due to their special shape featuring the interaction of four elastic torsional elements. Each insert is implemented by constraining two square profiles with four rubber inserts. The OWC range is an ideal alternative to the coil spring.
Platinum350
Login to send Inquiry
A user with the specified email address already exists. Please login with your password to proceed.
Email (Username)
 
Password
 
Remember me
 
  Forgot your password?



Click Here if you want to attach a document ...