Dometrics, Inc.
Cumel Doctor Oscillators
Designed and manufactured to be direct replacements for Valmet k80f or k80e oscillators (Valmet is using these oscillators on their latest board machines), but may be configured for almost any mounting; housings are protected with inerta primer and polyelastomeric paint; sliding shaft is case hardened steel, with two bearings and viton seals; pushing force is 14,700 n = 3240 lbs; ratio is 62:1; stroke is 16mm; 16 strokes/min; no greasing required; worm gear set is high precision; warranty is 12 months; life should be at least 5 years
Motors are totally closed per specification IP 67; specially designed, manufactured, and painted by Cumel for oscillating equipment in hot, wet, chemical environments. Motor rating is 0.37 kw; shaft seals are viton; end bells and terminal box covers are sealed with o-rings; cable sleeve packing per specification IP 68; motors are delivered with a 2 meter length of cable, but longer or shorter lengths can be supplied on request; motors tested under water
There is a gasket or an o-ring between the motor and the oscillator, which protects the flexible coupling. We ask you to try an oscillator and motor assembly, to test integrity of sealing design.
Click here for more Product Details from
Dometrics, Inc....
